Tuesday, January 16, 2018

Pilot Proof-Load Test on Viaduct De Beek: Case Study



My colleagues and myself recently published a paper in the Journal of Bridge Engineering, titled "Pilot Proof-Load Test on Viaduct De Beek: Case Study". The paper reports on the proof load test on viaduct De Beek which our research group carried out in November 2015. I couldn't join my colleagues in the field at that time, but in the summer of 2016, I helped finalizing the analysis report of the test.

The abstract is as follows:

For existing bridges, proof-load testing can be a suitable assessment method. This paper addresses the evaluation of a posted reinforced concrete slab bridge over a highway through proof-load testing, detailing the preparation, execution, and analysis of the test. As the target proof-load and the required measurements for proof-load testing currently are not well-defined in the existing codes, this pilot case was used to develop and evaluate proposed recommendations for proof-load testing for a future guideline on proof-load testing for the Netherlands. Moreover, the pilot proof-load test is used to study the feasibility of proof-load testing for both shear and flexure.

You can download the paper here:

3 comments:

  1. Dear Madam, Can i have full paper.
    Thanks

    ReplyDelete
    Replies
    1. Thank you very much for your kindness. Plz send it on my email address given below. I'm working project which is of similar type but i don't know how to write a paper for which i may need your help.
      kamranahmed44@gmail.com

      Delete

UA-49678081-1